ISOMAT is designed for all types of floor tiling installations. Proving superior
protection against substrate cracks and moisture migrations, it is ultrathin with a
thickness of under 1mm. Manufactured from two outer layers of polypropylene
non-woven with one inner layer of glass filament fabric.
Decoupling and tension reduction membrane, fitted between subfloor and tiling. Ideal over heated floors. Use where low build up is key.
Movement in substrates underneath is a common problem. This
movement causes tension on the tiles leading to them cracking.
ISOMAT provides a layer between the substrate and tiled covering
to contain the movement caused by expansion and contraction and
stops it from transferring to the tiles.
PRODUCT FEATURES
Tension Reducing De-coupling Matting
Low Structural Build-up
Flexible
Crack Bridging
Can be used with Underfoor Heating
Resistant to Alkaline and Rot
MATERIAL BASE POLYPROPYLENE
COLOUR WHITE
WIDTH 1M
LENGTH 50M
THICKNESS 0.87MM APPROX. (<1MM)
AREA WEIGHT 270G/M2
SERVICE TEMPERATURE RANGE - 30˚C TO + 90˚C
CERTIFIED TO DIN EN ISO 9001 : 2008
STORAGE INFO STORE AT ROOM TEMPERATURE AND PROTECT FROM SUNLIGHT AND MOISTURE
Physical Properties DIN VALUE
Breaking Load Longitudinal DIN EN ISO 527-3 > 900 N / 50mm
Breaking Load Lateral DIN EN ISO 527-3 > 900 N / 50mm
Extension Break Longitudinal DIN EN ISO 527-3 > 15%
Extension Break Lateral DIN EN ISO 527-3 > 15%
Bonding Strength DIN EN 1348 > 0.22 n / MM2 (in dependence of adhesive used)
Chemical Properties
Resistance after storage over 7 days by room temp in following chemical VALUE
Hydrochloric acid 3% Internal +
Sulphuric acid 35% Internal +
Citric acid 100 g/ l Internal +
Lactic acid 5% Internal Internal +
Potassium hydroxide 3% / 20 Internal + / +
Sodium hypochlorite 0,3 g/ l Internal +
Salt water (20 g/ l Sea water salt) Internal +
Note: Technical data represent average values. The technical information and application instructions are based on our experience and present
knowledge. However, it is each users own responsibility to make trials with the original substrates in order to verify the suitability of our products for
the intended purpose, taking into consideration all application related parameters. Please contact us if you have any further questions. In case of any
doubt, please obtain additional information from Stone Essentials.
*VALUE KEY • + = Resistant • 0 = Weakened • - = Non Resistant
Complied the strict requirements for classification according EMICODE
emission class EC 1 plus and according French VOC-regulation A+
PHYSIOLOGICAL PROPERTIES
ISOMAT is resistant to a wide range of chemicals, rot, fungus and
bacteria attacks. It is also impervious to root penetration. ISOMAT is
inert to drinking water.
STORAGE
Store in a cool, dry place, out of direct sunlight.
Do not store above +30°C.
DISPOSAL & THE ENVIRONMENT
ISOMAT is physiologically harmless. The product contains no
hazardous materials. Off-cuts can be disposed of as general building
site waste.
APPLICATION AREAS
ISOMAT is suitable for use on sound substrates including timber and
cracked concrete floors. It must be stuck down using high quality
standard flexible tile adhesive. Select an adhesive in accordance with
the substrate type.
Stone Essentials encourage users to confirm suitability with their
own trials before installation. Stone Essentials disavow any liability
resulting from use of non-suitable adhesive and resulting damage of
any kind.
Breaking Load Longitudinal DIN EN ISO 527-3 > 900 N / 50mm
Breaking Load Lateral DIN EN ISO 527-3 > 900 N / 50mm
Extension Break Longitudinal DIN EN ISO 527-3 > 15%
Extension Break Lateral DIN EN ISO 527-3 > 15%
Bonding Strength DIN EN 1348 > 0.22 n / MM2 (in dependence of adhesive used)
Chemical Properties
Resistance after storage over 7 days by room temp in following chemical VALUE
Hydrochloric acid 3% Internal +
Sulphuric acid 35% Internal +
Citric acid 100 g/ l Internal +
Lactic acid 5% Internal Internal +
Potassium hydroxide 3% / 20 Internal + / +
Sodium hypochlorite 0,3 g/ l Internal +
Salt water (20 g/ l Sea water salt) Internal +
Note: Technical data represent average values. The technical information and application instructions are based on our experience and present
knowledge. However, it is each users own responsibility to make trials with the original substrates in order to verify the suitability of our products for
the intended purpose, taking into consideration all application related parameters. Please contact us if you have any further questions. In case of any
doubt, please obtain additional information from Stone Essentials.
*VALUE KEY • + = Resistant • 0 = Weakened • - = Non Resistant
Complied the strict requirements for classification according EMICODE
emission class EC 1 plus and according French VOC-regulation A+
PHYSIOLOGICAL PROPERTIES
ISOMAT is resistant to a wide range of chemicals, rot, fungus and
bacteria attacks. It is also impervious to root penetration. ISOMAT is
inert to drinking water.
STORAGE
Store in a cool, dry place, out of direct sunlight.
Do not store above +30°C.
DISPOSAL & THE ENVIRONMENT
ISOMAT is physiologically harmless. The product contains no
hazardous materials. Off-cuts can be disposed of as general building
site waste.
APPLICATION AREAS
ISOMAT is suitable for use on sound substrates including timber and
cracked concrete floors. It must be stuck down using high quality
standard flexible tile adhesive. Select an adhesive in accordance with
the substrate type.
Stone Essentials encourage users to confirm suitability with their
own trials before installation. Stone Essentials disavow any liability
resulting from use of non-suitable adhesive and resulting damage of
any kind.